*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Improves Picture and Sound Quality
Level 3 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components
The M5100-PM is designed to provide noise isolation between 3 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Residential Systems Resi Award 2008
Winner — Best Power Management Product
Panamax's PM Family
Clean Power Level 3
Improves picture and sound quality by eliminating noise across the entire AC bandwidth. 60% more efficient at eliminating noise than single stage linear filtration (Level 2).
3 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
High Current Outlets
2 outlets for equipment with high power demands (Amps/Subwoofers).
Convenience charger for mp3 players, cell phones, and other small electronics.
Gaming LAN Port
Easy access to LAN port on front panel. Perfect for online gaming.
Digital Volt Meter
Monitor the voltage supplying your home theater equipment.
12 Volt Trigger
Allows source equipment to activate or deactivate the switched outlets on the M5100-PM.
Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
5 Always On, 4 Switched, 2 Switched High Current.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
Weight 13.5 lbs.
Dimensions 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)
Under-voltage shutoff 90 VAC ± 2 VAC
UL1449 Suppression Rating 330V
Total Current Capacity 15 A
Thermal Fusing Yes
Protection Modes L-N, L-G, N-G
Power Cord 10 ft fixed
Peak Impulse Current 90,000 Amps
Over-voltage shutoff 142 VAC ± 5 VAC
Line Voltage 120V, 60Hz
Initial Clamping Level 200V
Energy Dissipation 2310 Joules
Catastrophic Surge Circuit Yes
EMI/RFI Noise Filtration
Banks 1 & 2 80 db, 100 KHz − 2 MHz
Bank 3, High Current Outlets 60 db, 100 KHz − 2 MHz
DC Trigger Input
Voltage and Polarity 3 - 24V DC, bidirectional
Jacks 3.5mm mono mini-plug
Current Requirement 4.6 mA @3V, 58 mA @24V
Wires Protected 8-Wires
Clamping Level 50V
Power Delivery 500 mA @ 5VDC
Wires Protected 2-Wire, Pins 4 & 5
Suppression Modes Metallic & Longitudinal
Clamping Level 260V
Capacitance 30pf (approx.)
Universal Coax Protection
Insertion Loss < 0.5 dB
HD 1080 i/p Ready Yes
Frequency Range 0 MHz - 2.2 GHz
Connections Female "F", Gold Plated
Clamping Level 75V